AdvanceFluid TD 907
Concrete ready mix wet earth screeds radiant adherent floating desolated SCC and precast
Increase of plasticity and high mechanical performance reduction of water/cement ratio long workability
Increased compaction mechanical
resistance shorter drying time reduced
hygrometric shrinkage increased thermal
transmittance
Better, Faster, Cheaper
Description
- AdvanceFluid TD 907 stands out as a remarkable concrete ready mix wet earth screeds radiant adherent floating desolated scc and precast specifically developed for increase of plasticity and high mechanical performance reduction of water/cement ratio long workability. You'll appreciate that it provides increased compaction mechanical resistance shorter drying time reduced hygrometric shrinkage increased thermal transmittance. Choose AdvanceFluid TD 907 for reliable, professional results every time.
Advantages
- Increased compaction mechanical resistance shorter drying time reduced hygrometric shrinkage increased thermal transmittance
Increased compaction mechanical
resistance shorter drying time reduced
hygrometric shrinkage increased thermal
transmittance
Usage
Increase of plasticity and high mechanical performance reduction of water/cement ratio long workability
Increase of plasticity and high mechanical performance reduction of water/cement ratio long workability
Use for Increase of plasticity and high mechanical performance reduction of water/cement ratio long workability
0.3-2 kg per 100 kg of concrete or 0.12-0.8 kg per 100 kg of mass
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
liquid solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
≈24 months – protect from frost and sunlight
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.07 ± 0.2 at 20°C
Total chloride ion content
Nil(EN 934-2)
Packaging
20 kg jerrycans - 200 kg drums - 1000 kg IBC
Colour
light-yellow
Moisture Testing Method
Measure residual moisture using carbide bomb (target: 2.0% unheated 1.8% heated)
Residual Humidity Spec
<2% after 5 days (20°C and 65% U.R.)
Thermal Conductivity (W/mK)
1.83 W/mK
Flexural Strength 28 days
F4 to F7 (UNI EN 73892)
Compressive Strength 28 days (N/mm²)
40-65 N/mm² (UNI EN 73892)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
0.3-2 kg per 100 kg of concrete or 0.12-0.8 kg per 100 kg of mass
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
