DisperGloo-103
Aqueous solution of a copolymer
DisperGloo-103 is designed for the following applications:
A VOC-free and solvent-free wetting and dispersing additive specifically designed for printing inks and adhesives.
Suitable for Printing inks and adhesives, Coatings Industry
Inorganic pigments: 20-30% Titanium dioxide: 10-12% Organic pigments: 30-75% Carbon blacks: 130-150% Levels - Fillers 1-3%
For optimal results, incorporate the additive into your millbase before adding pigments.
Start by mixing your resin and solvent components, then slowly add the additive while stirring continuously to ensure even distribution.
Only add pigments after the additive is fully dispersed.
If needed, you can add this product later to fix problematic batches.
Just remember that post-addition requires gradual introduction under high shear forces for proper integration.
Better, Faster, Cheaper
Description
- A VOC-free and solvent-free wetting and dispersing additive specifically designed for printing inks and adhesives. The standard choice for binder-free pigment concentrates and suitable for all pigment types.
Advantages
- Perfect for creating binder-free, stable pigment concentrates with 30-60% pigment content. These concentrates can be easily let down with standard aqueous binders like acrylate dispersions or water-soluble acrylic resins.
Perfect for creating binder-free, stable pigment concentrates with 30-60% pigment content.
These concentrates can be easily let down with standard aqueous binders like acrylate dispersions or water-soluble acrylic resins.
Due to the smaller particle sizes achieved, you'll get higher gloss levels and improved color strength.
It also enhances transparency, reduces viscosity, improves flow characteristics, and allows for higher pigment loading.
Usage
DisperGloo-103 is designed for the following applications:
DisperGloo-103 is designed for the following applications:
A VOC-free and solvent-free wetting and dispersing additive specifically designed for printing inks and adhesives.
Suitable for Printing inks and adhesives, Coatings Industry
Inorganic pigments: 20-30% Titanium dioxide: 10-12% Organic pigments: 30-75% Carbon blacks: 130-150% Levels - Fillers 1-3%
For optimal results, incorporate the additive into your millbase before adding pigments.
Start by mixing your resin and solvent components, then slowly add the additive while stirring continuously to ensure even distribution.
Only add pigments after the additive is fully dispersed.
If needed, you can add this product later to fix problematic batches.
Just remember that post-addition requires gradual introduction under high shear forces for proper integration.
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of a copolymer
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 g/cm³
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
-
Dispensing
For optimal results, incorporate the additive into your millbase before adding pigments. Start by mixing your resin and solvent components, then slowly add the additive while stirring continuously to ensure even distribution. Only add pigments after the additive is fully dispersed.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We ’re here to help!
Recommended dosage
Inorganic pigments: 20-30%
Titanium dioxide: 10-12%
Organic pigments: 30-75%
Carbon blacks: 130-150%
Levels - Fillers 1-3%Concreting guidance
If needed, you can add this product later to fix problematic batches. Just remember that post-addition requires gradual introduction under high shear forces for proper integration.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
