PlastFluid 155
high Range Water Reducing and Slump reta ining Concrete Admixture
PlastFluid 155 acts by surface adsorption on the cement particles producing steric hindrance as well as electrostatic repulsion between the binder particles which results in higher dispersion, flow and retention.
Easier control during casting due to sufficient retention period and high early strength development, high water reduction (leading to high density and strength) even in double or triple blend mixes (e.g. cement, GGBS, and silica fume).
A low w/b ratio leads to very low water permeability and chloride migration, as well as high early strength and strength development, even with the use of low cement content mixes, which improves shrinkage and creep behaviour.
Excellent flow ability, resulting in minimal placing and compacting efforts.
It does not contain chloridesor or other steel corrosion-promoting ingredients so that it may be used for Reinforced and pre-stressed concrete construction.
Better, Faster, Cheaper
Description
- PlastFluid 155 is a New Generation Polyelectrolytes Based co-polymer based superplasticizer developed particularly for use in ready mixed concrete to give extended slump retention and high strength development of normal grade concrete mixes. PlastFluid 155 is suitable for use in concrete mixes incorporating pozzolanic materials such as GGBS, PFA and microsilica. Suitable for use in hot and tropical climatic conditions.
Advantages
- PlastFluid 155 acts by surface adsorption on the cement particles producing steric hindrance as well as electrostatic repulsion between the binder particles which results in higher dispersion, flow and retention.
PlastFluid 155 provides the following beneficial properties
Substantial improvement in workability without increased water
Low risk of segregation
Normal set without retardation (with in the dosage limit)
Improved density and surface finish
Improved water tightness
Excellent solution for continuous concrete casting of deep elements
so may be used for Reinforced and pre-stressed concrete construction
Usage
Ready mixed concrete high flow concrete Concrete with high water reduction
high strength concrete SlabsFoundationsWallsColumns and piersPilesPre-stressed concrete Bridges and cantilever structures
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
