PlastFluid 2XX SS
Mid-Range water reducing and retarding concrete admixture
PlastFluid 2XX SS acts by surface adsorption on the cement particles producing steric hindrance as well as electrostatic repulsion between the binder particles which results in higher dispersion, flow and retention.
Increased working time
Early strength development resulting in economic stripping time for pre-cast and in cast-situe concrete high water reduction resulting in high density, high strength, and reduced water permeability
Excellent plasticizing effect, improving flowability, placing, and compaction behaviour. Improved surface finish
Better shrinkage and creep behaviour
Low risk of segregation
Reduces energy costs for steam-cured pre-cast elements
Does not contain chloridesor or another steel corrosion-promoting ingredient
Better, Faster, Cheaper
Description
- PlastFluid 2XX SS is a New Generation Polyelectrolytes Based co-polymer based superplasticizer developed particularly for use in ready mixed concrete to give extended slump retention and high strength development of normal grade concrete mixes. PlastFluid 2XX SS is suitable for use in concrete mixes incorporating pozzolanic materials such as GGBS, PFA and microsilica. Suitable for use in hot and tropical climatic conditions.
Advantages
- PlastFluid 2XX SS acts by surface adsorption on the cement particles producing steric hindrance as well as electrostatic repulsion between the binder particles which results in higher dispersion, flow and retention.
PlastFluid 2XX SS provides the following beneficial properties
Usage
Facilitates extreme water reduction, excellent flow ability with optimum cohesion and impressive slump retention characteristics It's used for the following type sof concrete:
Facilitates extreme water reduction, excellent flow ability with optimum cohesion and impressive slump retention characteristics It's used for the following type sof concrete:
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
