SlumpFluid RRC 4
high performance retarding plasticiser for concrete
Reducessegregation and bleed ingImprovescohesion, workability and compactability in concrete using poorly graded/shaped fine aggregates. Reduces placing problems in hot weather by improved workability and workability retention in conjunction with extended setting times Improves surface finish Improves trowellability Reduces honey combing / cold jo int effects
Increased working time
Early strength development resulting in economic stripping time for pre-cast and in cast-situe concrete high water reduction resulting in high density, high strength, and reduced water permeability
Excellent plasticizing effect, improving flowability, placing, and compaction behaviour. Improved surface finish
Better shrinkage and creep behaviour
Low risk of segregation
Reduces energy costs for steam-cured pre-cast elements
Does not contain chloridesor or another steel corrosion-promoting ingredient
Better, Faster, Cheaper
Description
- SlumpFluid RRC 4 is a high-performance plasticising retarder, beneficial in ma inta ining workability especially in high ambient temperatures. Suitable for use in hot and tropical climatic conditions.
Advantages
- Reducessegregation and bleed ingImprovescohesion, workability and compactability in concrete using poorly graded/shaped fine aggregates. Reduces placing problems in hot weather by improved workability and workability retention in conjunction with extended setting times Improves surface finish Improves trowellability Reduces honey combing / cold jo int effects
Powerful plasticising action Production of workable concrete at low w/b ratio Improved shrinkage and creep characteristics Excellent flowability resulting in minimal placing and compacting efforts Slower rate of carbonation ingress Cost-effective, structurally economic higher ultimate strengths allows greater flexibility for engineers to design Reduced surface defects so improving aesthetic appearance
Durable concrete
i
Usage
Ready mixed concrete where high workability retention and retardation are highly required.
Hot weather concreting of all types.
Pre-cast concrete
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
