SuperFluid Anti-Frost
Extreme-performance screed additive
Helps create smooth surfaces easily while improving drying and strength for frost protection
Accelerates hydration and hardening;
enables compression strength >5 N/mm² for
frost protection
Helps create smooth surfaces easily while improving drying and strength for frost protection
Better, Faster, Cheaper
Description
- Looking for a game-changer in extreme-performance screed additive? SuperFluid Anti-Frost delivers exceptional results specifically developed for helps create smooth surfaces easily while improving drying and strength for frost protection. What makes it special? It provides accelerates hydration and hardening; enables compression strength >5 n/mm² for frost protection. Professionals trust SuperFluid Anti-Frost for consistent quality performance.
Advantages
- Accelerates hydration and hardening; enables compression strength >5 N/mm² for frost protection
Accelerates hydration and hardening;
enables compression strength >5 N/mm² for
frost protection
Helps create smooth surfaces easily while improving drying and strength for frost protection
Usage
For unreinforced mortar in winter (ambient 5 to –10°C); for bonded and floating screeds; underfloor heating; damp/outside areas
For unreinforced mortar in winter (ambient 5 to –10°C); for bonded and floating screeds; underfloor heating; damp/outside areas
Use for For unreinforced mortar in winter (ambient 5 to –10°C); for bonded and floating screeds; underfloor heating; damp/outside areas
Mix with maximum w/c ratio 0.42; cement 320 kg/m³; dosage 0.3–3.0 %; mix sufficiently
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Liquid solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
≈24 months – protect from frost and sunlight
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 ± 0.05 g/ml
Total chloride ion content
Nil(EN 934-2)
Packaging
20-liter jar can
Colour
between white and beige
Moisture Testing Method
Measure residual moisture using carbide bomb (target: 2.0% unheated 1.8% heated)
Residual Humidity Spec
<2% after 5 days (20°C and 65% U.R.)
Thermal Conductivity (W/mK)
1.83 W/mK
Flexural Strength 28 days
F4 to F7 (EN 73892)
Compressive Strength 28 days (N/mm²)
42-69 N/mm² (EN 73892)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
Mix with maximum w/c ratio 0.42; cement 320 kg/m³; dosage 0.3–3.0 %; mix sufficiently
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
