Better, Faster, Cheaper
Description
- Meet SuperFluid XF-Ready, the revolutionary floating screed (min 3 cm) desolidarized screed (min 2.5 cm) that's transforming the industry that truly shines when used for self-leveling radiant adherent floating bleached screeds. Customers love that it provides increased compaction mechanical resistance shorter drying time reduced hygrometric shrinkage increased thermal transmittance. Choose SuperFluid XF-Ready for reliable, professional results every time.
Advantages
- Increased compaction mechanical resistance shorter drying time reduced hygrometric shrinkage increased thermal transmittance
Increased compaction mechanical
resistance shorter drying time reduced
hygrometric shrinkage increased thermal
transmittance
Usage
Self-leveling radiant adherent floating bleached screeds
Self-leveling radiant adherent floating bleached screeds
Use for Self-leveling radiant adherent floating bleached screeds
2.4 kg mm2
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Powder solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
≈24 months – protect from frost and sunlight
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
~2.400 kg/m³
Total chloride ion content
Nil(EN 934-2)
Packaging
Bags of 25 kg Big Bag of 1000 Kg
Colour
Light gray
Moisture Testing Method
Measure residual moisture using carbide bomb (target: 2.0% unheated 1.8% heated)
Residual Humidity Spec
<2% after 7 days (20°C and 65% U.R.)
Thermal Conductivity (W/mK)
1.83 W/mK
Flexural Strength 28 days
20 N/mm² (EN 13892-2)
Compressive Strength 28 days (N/mm²)
65 N/mm² (EN 13892-2)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
Alkaline
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
2.4 kg mm2
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
