ViscoFluid 1XX TS
high Performance SUPERPLASTICIZER for PRECAST CONCRETE
ViscoFluid 1XX TS worksas a powerful superplasticizer and acts by different mechanisms. Through surface adsorption and steric hinderance effects separating the binder particles which results in higher dispersion, ViscoFluid 1XX TS allows the possibility to work with very low water/binder ratiosby avoiding the high stickinesscommon to such k indsof mix. The following propertiesare achieved:
Easier control during casting due to sufficient retention period and high early strength development, high water reduction (leading to high density and strength) even in double or triple blend mixes (e.g. cement, GGBS, and silica fume).
A low w/b ratio leads to very low water permeability and chloride migration, as well as high early strength and strength development, even with the use of low cement content mixes, which improves shrinkage and creep behaviour.
Excellent flow ability, resulting in minimal placing and compacting efforts.
Does not contain chloridesor or other steel corrosion-promoting ingredients, so it may be used for Reinforced and pre-stressed concrete construction
Better, Faster, Cheaper
Description
- ViscoFluid 1XX TS is a third generation superplasticizer for high performance concrete particularly formulated for the production of precast elements, targeting its special demands regarding slump retention, very low water/binder ratios, use of double or triple blend mixes (cement, GGBFS, PFA and/or microsilica) and high degree of compaction. ViscoFluid 1XX TS is especially suitable for use in Steel Fiber Reinforced Concrete (SFRC) and concrete Mixes containing polypropylene fibers for fire protection as commonly used in precast concrete tunnel segment production. Suitable for use in hot and tropical climatic conditions.
Advantages
- ViscoFluid 1XX TS worksas a powerful superplasticizer and acts by different mechanisms. Through surface adsorption and steric hinderance effects separating the binder particles which results in higher dispersion, ViscoFluid 1XX TS allows the possibility to work with very low water/binder ratiosby avoiding the high stickinesscommon to such k indsof mix. The following propertiesare achieved
Eas ier to control during casting due to sufficient retention period and high early strength development
Extremely high water reduction (resulting in high density and strengths) even in double or triple blend mixes(e. g. cement, GGBS, and silica fume)
Low w/b ratio leads to very low water permeability, and chloride migration
Increased high early strength and strength development even with the use of low cement content mixes
Improved shrinkage and creep behavior
Excellent flow ability resulting in minimal placing and compacting ef fortsleading to
much denser concrete
there fore may be used for Reinforced and pre-stressed concrete construction
Usage
Facilitates extreme water reduction
with optimum cohesion and workability as required
just by adjusting the dosage. It is used mainly to the following typesof concrete:
Precast concrete tunnel segments
Precast concrete in general
Pre-stressed concrete elements
Post-tensioned concrete bridge segments
fast track concrete In situ concrete that requires fast stripping time
Mixes containing Steel Fiber Reinforced Concrete (SFRC)
synthetic fibers and polypropylene fibers for structural and or fire resistant concrete
Concrete with high water reduction that requires high workability
Fast-track concrete In situ concrete that requires fast stripping timeesistant concrete
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
