ViscoFluid 2X HH
high Range Water Reducer / Superplasticiser
high water reduction high f inal density and strength properties Reduced shrinkage, creep, water permeability, etcImproved flowability, placing and compacting behaviourImproved surface finishIncreased early strength development Early removal of formwork Reduced curing Does not contain chloridesSuitable for use in Reinforced and pre-stressed concrete
Easier to control during casting due to sufficient retention period and high early strength development
Extremely high water reduction (resulting in high density and strength) even in double or triple blend mixes(e.g. cement, GGBS, and silica fume)
A low w/b ratio leads to very low water permeability and chloride migration.
Increased high early strength and strength development even with the use of low cement content mixes
Improved shrinkage and creep behavior
Excellent flow ability resulting in minimal placing and compacting efforts, leading to much denser concrete
It does not contain chlorides or other steel corrosion-promoting ingredients; therefore, it may be used for Reinforced and pre-stressed concrete construction.
Better, Faster, Cheaper
Description
- ViscoFluid 2X HH is a liquid admixture for concrete and mortar which is used as high range water reducer or superplasticiser. ViscoFluid 2X HH is designed to work on a combination of electrostatic adsorption and steric repulsion effectsallowing solid particles to be effectively dispersed. There fore a high level of fluidity and plasticising can be reached with a high water reduction which providesmany advantages.
Suitable for use in tropical and hot climatic conditions.
Advantages
- high water reduction high f inal density and strength properties Reduced shrinkage, creep, water permeability, etcImproved flowability, placing and compacting behaviourImproved surface finishIncreased early strength development Early removal of formwork Reduced curing Does not contain chloridesSuitable for use in Reinforced and pre-stressed concrete
Powerful plasticising action Production of workable concrete at low w/b ratio Improved shrinkage and creep characteristics Excellent flowability resulting in minimal placing and compacting efforts Slower rate of carbonation ingress Cost-effective, structurally economic higher ultimate strengths allows greater flexibility for engineers to design Reduced surface defects so improving aesthetic appearance
Durable concrete
i
Usage
Production of concrete mixes which require high early strength development
powerful water reduction and improved flowability.
Precast concrete Fast-track concrete In situ concrete requiring fast stripping time
Self Compacting Concrete (SCC)
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
