ViscoFluid 2XXE
high Range Water Reducing / Superplasticizing Admixture for Precast concrete
ViscoFluid 2XXE acts as a powerful superplasticizer by both surface adsorption and steric hindrance effects separating the binder particlesresulting in:
Powerful plasticising action Production of workable concrete at low w/b ratio Improved shrinkage and creep characteristics
Excellent flowability resulting in minimal placing and compacting efforts Slower rate of carbonation ingress
Cost-effective, structurally economic, and higher ultimate strengths allow greater flexibility for engineers to design
Reduced surface defects, improving aesthetic appearance
Durable concrete
Does not contain chloridesor or other steel corrosion-promoting ingredients
Better, Faster, Cheaper
Description
- ViscoFluid 2XXE is a New Generation Polyelectrolytes Based co-polymer based superplasticizer particularly developed for use in the precast industry to give high workability at low water: • binder ratioswith normal setting times. Suitable for use in hot and tropical climatic conditions.
Advantages
- ViscoFluid 2XXE acts as a powerful superplasticizer by both surface adsorption and steric hindrance effects separating the binder particlesresulting in
higher dispersionThe possibility to work with very low water/binder ratios and avoiding the high stickinesscommon to such k ind of mixesEas ier to control during casting due to sufficient retention period and high early strength developmentExtremely high water reduction (resulting in high density and strengths) even in double or triple blend mixes(e. g. cement, GGBS, and silica fume) Low water permeability and chloride migrationIncreased high early strength and strength development even with the use of low cement content mixesImproved shrinkage and creep behavior Excellent flow ability resulting in minimal placing and compacting ef fortsleading to much denser concrete
Usage
Has been specially developed for:
high flow concrete Concrete with a low water
binder ratio high strength concrete Production of precast concrete elements
Panels
beams
column set CS team or normal curing conditions
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
