ViscoFluid 311X CX
high Range Water-Reducing and retarding Admixture for concrete
ViscoFluid 311X CX acts by surface adsorption on the cement particles producing steric hindrance and electrostatic repulsion between cement particles which results in higher dispersion, flow and retention.
Easier to control during casting due to sufficient retention period and high early strength development
Extremely high water reduction (resulting in high density and strength) even in double or triple blend mixes(e.g. cement, GGBS, and silica fume)
A low w/b ratio leads to very low water permeability and chloride migration.
Increased high early strength and strength development even with the use of low cement content mixes
Improved shrinkage and creep behavior
Excellent flow ability resulting in minimal placing and compacting efforts, leading to much denser concrete
It does not contain chlorides or other steel corrosion-promoting ingredients; therefore, it may be used for Reinforced and pre-stressed concrete construction.
Better, Faster, Cheaper
Description
- ViscoFluid 311X CX is a New Generation Polyelectrolytes Based co-polymer based superplasticizer developed particularly for use in ready mixed concrete to give extended slump retention and high strength development of high specification grade concrete mixes. ViscoFluid 311X CX is suitable for use in concrete mixes incorporating pozzolanic materials such as GGBS, PFA and microsilica. Suitable for use in hot and tropical climatic conditions.
Advantages
- ViscoFluid 311X CX acts by surface adsorption on the cement particles producing steric hindrance and electrostatic repulsion between cement particles which results in higher dispersion, flow and retention.
ViscoFluid 311X CX provides the following beneficial properties
Powerful plasticising action Production of workable concrete at low w/b ratio Improved shrinkage and creep characteristics Excellent flowability resulting in minimal placing and compacting ef forts Slower rate of carbonation ingress Cost effective, structurally economic higher ultimate strengths allows greater flexibility for eng ineers to design Reduced surface defectsso improving aesthetic appearance
Durable concrete
i
Usage
is mainly used for the following applications:
Production of site mixed and ready-mix concrete high performance
high strength concrete Concrete with low water binder ratio
Concrete placing in congested steel reinforcement
Depending on dosage rate used; high flow and self-compacting concrete (SCC) Concrete requiring retained workability During hot weather production of concrete with extended transportation or placing times
Slim elements requiring a high standard of surface finish
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
