ViscoFluid 311X X A
high range superplasticizing Admixture for self-compacting Concrete (SCC)
ViscoFluid 311X X A Plusprovides the following beneficial properties:
Easier to control during casting due to sufficient retention period and high early strength development
Extremely high water reduction (resulting in high density and strength) even in double or triple blend mixes(e.g. cement, GGBS, and silica fume)
A low w/b ratio leads to very low water permeability and chloride migration.
Increased high early strength and strength development even with the use of low cement content mixes
Improved shrinkage and creep behavior
Excellent flow ability resulting in minimal placing and compacting efforts, leading to much denser concrete
It does not contain chlorides or other steel corrosion-promoting ingredients; therefore, it may be used for Reinforced and pre-stressed concrete construction.
Better, Faster, Cheaper
Description
- ViscoFluid 311X X A Plusisa third generation New Generation Polyelectrolytes Based co-polymer based superplasticizer for concrete. It has been particularly developed for use in ready mixed concrete to give extended slump retention and high strength development of normal grade concrete mixes. ViscoFluid 311X X A Plusissuitable for use in concrete Mixes containing microsilica and or other pozzolanic materials such as GGBS and fly as h. Suitable for use in hot and tropical climatic conditions.
Advantages
- ViscoFluid 311X X A Plusprovides the following beneficial properties
Powerful self-compacting behaviorNo vibration is required, even at very low water cement ratios high Plasticity and Cohesion; Special formulation helpsma inta in plasticity of concrete and extendsworkability time during warmer monthswhen slump loss and fast stiffening of the fresh concrete can be a concern Reduced energy cost for steam cured precast elements high strength developmentAllows for greater eng ineering design flexibility and structural economies highly effective plasticizer reducessurface defects in concrete elements and improves aesthetic appearanceProduce durable and dense concrete with reduced permeabilityImproved shrinkage and creep behavior Slower rate of carbonation ingress in the concrete Improved finishing characteristics, especially when a broom is desiredVery good cost / performance ratio, structurally economic there fore may be used for Reinforced and pre-stressed concrete construction
Usage
Facilitates extreme water reduction
excellent flow ability with optimum cohesion
high early strength development
impressive self-compacting behavior and extended slump life.
is mainly used for the following applications:
Production of site mixed and ready-mix concrete
During hot weather production of concrete with extended transportation or placing times
Concrete requiring retained workability for extended periods
Concrete with low water
cement ratio
Concrete placement in congested steel reinforcement
Self-compacting concrete
Slim elements requiring a high standard of surface finish
high performance
high strength concrete
Overview
Overview
Sustainability / Certificates / Compliance
-
Conforms to the requirements of BS EN 934-2 Table 2
-
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information
Composition
Aqueous solution of modified New Generation Polyelectrolytes Based co-polymer.
Shelf life
12 monts From date of Production if stored properly
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Density
1.06 kg/l +/- 3% (+25°C)
Total chloride ion content
Nil(EN 934-2)
Packaging
210 Liters drum, 1000 Liters IBC or bulk supply in tanker
Colour
Clear to light yellow liquid
Moisture Testing Method
Residual Humidity Spec
Thermal Conductivity (W/mK)
Flexural Strength 28 days
Compressive Strength 28 days (N/mm²)
Drying Time (days)
Application Temp Range
+5°C to +50°C
pH Value
5 ± 0.1
-
Dispensing
This is a ready-to-use admixture that should be added to the concrete as a separate component. For the best results, add it to the concrete mix immediately after the first 80% of the mixing water has been introduced—when all solids are properly wetted. Avoid adding the admixture directly to dry aggregates.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Recommended dosage
The recommended dosage ranges from 0.3% to 2. 0% by weight of the binder or 0.13% to 0.2% by weight of the total mix mass. However, the exact dosage may vary based on mix design, raw materials, climatic conditions, and specific concrete requirements. It is essential to conduct trial mixes to determine the optimal dosage for your application.
Concreting guidance
Follow standard best practices for concrete production and placement, adhering to relevant industry standards. Proper curing of fresh concrete is essential, especially in high temperatures, to prevent plastic and drying shrinkage.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
The information contained in this document is, in any case, only indicative and must be confirmed by exhaustive practical applications before using the product, ensuring that the use is suitable for the intended use. However, it assumes any responsibility that may arise from its use. For further information, see the updated Technical Data Sheet.
Compatibility
To ensure compatibility among products, please reach out to our technical team. We’re here to help!
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Storage conditions
Store in its original, sealed, and undamaged packaging in a dry environment at temperatures between +5°C and +50°C before use, ensure the product is well mixed for optimal performance.
Contact Us
Ubora Office Tower - Business Bay
Dubai - Emirati Arabi Uniti
© 2025 by Bellavita-Costa Consulting
